MIL-DTL-382E
4.2.2 Inspections to be performed. The first article sample shall be subjected to
inspection and tests specified in Table V and 4.4.
4.2.2.1 Rejection. If any sample fails to comply with any of the applicable requirements
the first article quantity shall be rejected.
TABLE V. First article acceptance inspection.
Classification
Metal Powder First Article
Requirement
Inspection
Acceptance Test
Paragraph
Method
Reference
Critical
None defined
Major
101
Material
3.2
4.5.1
102
Form
3.3
4.5.2
103
Chemical composition
3.4
4.5.3
104
Granulation
3.5
4.5.4
105
Apparent density
3.6
4.5.5
Minor
201
Workmanship
3.7
4.5.6
202
Process verification
3.8
4.5.7
4.3 Conformance inspection.
4.3.1 Inspection lot formation. Lot formation shall be in accordance with the lot
formation requirements of MIL-STD-1916. A lot shall consist of no more than one type of
powder and no more than one granulation.
4.3.2 Classification of characteristics. Conformance inspection shall be performed in
accordance with inspection provisions set forth herein. The characteristics shown in 3.2 through
3.8 when tested in accordance with 4.5 shall constitute minimum inspections to be performed.
4.3.3 Inspection requirements by classification of characteristics.
a. For the conformance inspection paragraph 4.3.3.1, the definitions of critical, major
and minor defects are provided in paragraph "Definitions" of MIL-STD-1916.
8
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business