MIL-DTL-14067C
3.4.7 Total Fe. The total Fe shall conform to the chemical and physical requirements as
shown in Table I.
3.4.8 Carbides. The carbides shall conform to the chemical and physical requirements as
shown in Table I.
3.4.9 Total Al and Mg. The total aluminum and magnesium shall conform to the
chemical and physical requirements as shown in Table I.
3.4.10 Apparent density. The apparent density shall conform to the chemical and
physical requirements as shown in Table I.
3.5 Granulation. The metal powder shall conform to the granulation requirements in
Table II.
3.6 Average particle size. The average particle size shall conform to the requirements in
Table III.
3.6.1 Particle size for type V. The average particle size for type V aluminum powder
shall be 25 ± 5 micrometers (µ m).
3.7 Workmanship. The metal powder shall be uniform in quality and free from lumps,
grit, visible impurities, foreign matter, or other defects that would render the metal powder
unsuitable for intended use.
3.8 Process verification.
3.8.1 Type I, II,III and V. Type I, II, III and V powder shall be manufactured by the
atomizing process.
3.8.2 Type IV. Type IV magnesium powder shall be manufactured by hammering of the
material.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business