MIL-DTL-10866E
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of the documents cited in sections 3 and 4 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract (see 6.2).
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-1916
- DoD Preferred Methods for Acceptance of Product.
(Copies of these documents are available at https://assist.daps.dla.mil or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA
19111-5094.)
2.3 Non-government publications. The following documents form a part of this
specification to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract (see 6.2).
ASTM INTERNATIONAL
ASTM E 1
- Standard Specification for ASTM Liquid-in-Glass
Thermometers.
ASTM E 11
- Standard Specification for Wire Cloth and Sieves for
Testing Purposes.
ASTM E 203
- Standard Test Method for Water Using Volumetric
Karl Fischer Titration.
ASTM E 258
- Standard Test Method for Total Nitrogen in Organic
Materials by Modified Kjeldahl Method.
(Copies of these documents are available online at https://www.astm.org/ or from ASTM
International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959.)
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business