O-E-751C
4.3.9 Aromatics. The test for aromatics shall be in accordance with ASTM D 1319.
4.3.10 Free and corrosive sulfur. The test for copper corrosion shall be in accordance with
ASTM D 130 using the test bomb method.
5. PACKAGING
5.1 Packaging. Preservation, packing, and marking shall be as specified in the acquisition order
(see 6.2).
6. NOTES
INFORMATION FOR GUIDANCE ONLY. (This section contains information of a general or explanatory nature that is helpful, but is not mandatory.)
6.1 Intended use. The petroleum ether specified in this document is a grade intended for use as a solvent. This product is not intended for medical purposes. CAUTION: Petroleum ether is highly flammable and when mixed with air may form an explosive mixture.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number, revision, and date of this standard.
b. Responsibility for inspection, if different (see 4.1). c. Facilities for inspection, if different (see 4.1).
d. Quality conformance tests, if different (see 4.2). e. Packaging (see 5.1).
6.3 Materials safety data sheet (MSDS). Contracting officers will identify those activities requiring copies of completed MSDS prepared in accordance with FED-STD-313 and meeting the requirements of 29 CFR 1910.1200. The pertinent government mailing addresses for submission of the data are listed in FED-STD-313, and 29 CFR 1910.1200 requires that the MSDS for each hazardous chemical used in an operation must be readily available to personnel
using the material. Contracting officers will identify the activities requiring copies of the MSDS.
6.4 Sampling and testing precautions. This specification requires inspection of chemical
material that is potentially hazardous to personnel. This specification does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this specification to establish appropriate safety and health practices and determine the applicability
of regulatory limitations prior to use.
6.5 Submission of alternate inspection provisions. Proposed alternative inspection provisions should be submitted by the contractor to the procuring contracting officer for evaluation and approval by the technical activity responsible for preparation of this specification.
6.6 Standard sample. When practicable, an original unopened container shall be sent to the laboratory for test. When this is not practicable, a representative composite sample shall be
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business